Procedure of assembly wiring
To each page : 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13

Mount the resistor R1

Mount the resistor R1 to 14J and 14M with the same direction of color code.
Bend the lead of 14M toward 13M a little.
Bend the lead of 14J to 16J and cut it at 16J.
Hold down R1 from the parts side, and adjust the angle of the lead of R1 of 14M side, and put the lead of 14J side lead of R1 to 16J.
Solder the lead of 16J of R1 and the lead of IC socket together.
Bend the lead of 14M to 14L, and bend more to 15K, and cut it at 15K.
Solder the lead 14M.

Mount the diode D1

Mount D1 to the 15K and 15N from parts side. The anode side is 15K and the cathode side is 15N.
Bend the lead of 15N to 15O a little,
Cut and leave about 0.5 mm the lead of 15K of D1 that is bended toward 16J so as not to contact with surrounding land.
Solder the lead of 15K of R1 and the lead of D1 together.
Bend the lead 15N to 16N, and bend more to 17M, and cut it at 17M.
Sloder the lead 14L and 16N.