XACT: version D.19 Xilinx Inc.
Fitter Report
Design Name: latch_a Date: 7-22-2000, 9:03PM
Device Used: XC9572-15-PC84
Fitting Status: Successful
**************************** Resource Summary ****************************
Macrocells Product Terms Registers Pins Function Block
Used Used Used Used Inputs Used
56 /72 ( 77%) 168 /360 ( 46%) 56 /72 ( 77%) 68 /69 ( 98%) 103/144 ( 71%)
PIN RESOURCES:
Signal Type Required Mapped | Pin Type Used Remaining
------------------------------------|---------------------------------------
Input : 12 12 | I/O : 62 1
Output : 56 56 | GCK/IO : 3 0
Bidirectional : 0 0 | GTS/IO : 2 0
GCK : 0 0 | GSR/IO : 1 0
GTS : 0 0 |
GSR : 0 0 |
---- ----
Total 68 68
MACROCELL RESOURCES:
Total Macrocells Available 72
Registered Macrocells 56
Non-registered Macrocell driving I/O 0
GLOBAL RESOURCES:
Global clock net(s) unused.
Global output enable net(s) unused.
Global set/reset net(s) unused.
POWER DATA:
There are 56 macrocells in high performance mode (MCHP).
There are 0 macrocells in low power mode (MCLP).
There are a total of 56 macrocells used (MC).
End of Resource Summary
***************Resources Used by Successfully Mapped Logic******************
** LOGIC **
Signal Total Signals Loc Pwr Slew Pin Pin Pin
Name Pt Used Mode Rate # Type Use
q00<0> 3 7 FB3_7 STD FAST 35 I/O O
q00<1> 3 7 FB3_15 STD FAST 37 I/O O
q00<2> 3 7 FB3_10 STD FAST 40 I/O O
q00<3> 3 7 FB3_17 STD FAST 39 I/O O
q00<4> 3 7 FB3_12 STD FAST 41 I/O O
q00<5> 3 7 FB4_2 STD FAST 44 I/O O
q00<6> 3 7 FB3_13 STD FAST 43 I/O O
q01<0> 3 7 FB4_1 STD FAST 46 I/O O
q01<1> 3 7 FB3_16 STD FAST 45 I/O O
q01<2> 3 7 FB4_8 STD FAST 48 I/O O
q01<3> 3 7 FB4_5 STD FAST 47 I/O O
q01<4> 3 7 FB4_9 STD FAST 50 I/O O
q01<5> 3 7 FB4_4 STD FAST 52 I/O O
q01<6> 3 7 FB4_7 STD FAST 55 I/O O
q02<0> 3 7 FB4_13 STD FAST 61 I/O O
q02<1> 3 7 FB2_1 STD FAST 63 I/O O
q02<2> 3 7 FB4_15 STD FAST 65 I/O O
q02<3> 3 7 FB2_3 STD FAST 67 I/O O
q02<4> 3 7 FB2_2 STD FAST 69 I/O O
q02<5> 3 7 FB2_6 STD FAST 71 I/O O
q02<6> 3 7 FB2_7 STD FAST 76 GTS/I/O O
q03<0> 3 7 FB2_17 STD FAST 84 I/O O
q03<1> 3 7 FB2_15 STD FAST 83 I/O O
q03<2> 3 7 FB2_16 STD FAST 82 I/O O
q03<3> 3 7 FB2_14 STD FAST 81 I/O O
q03<4> 3 7 FB2_13 STD FAST 80 I/O O
q03<5> 3 7 FB2_12 STD FAST 79 I/O O
q03<6> 3 7 FB2_11 STD FAST 77 GTS/I/O O
q04<0> 3 7 FB1_4 STD FAST 7 I/O O
q04<1> 3 7 FB1_3 STD FAST 6 I/O O
q04<2> 3 7 FB1_8 STD FAST 5 I/O O
q04<3> 3 7 FB1_1 STD FAST 4 I/O O
q04<4> 3 7 FB1_6 STD FAST 3 I/O O
q04<5> 3 7 FB1_5 STD FAST 2 I/O O
q04<6> 3 7 FB1_2 STD FAST 1 I/O O
q05<0> 3 7 FB1_17 STD FAST 15 I/O O
q05<1> 3 7 FB1_15 STD FAST 14 I/O O
q05<2> 3 7 FB1_14 STD FAST 12 GCK/I/O O
q05<3> 3 7 FB1_10 STD FAST 13 I/O O
q05<4> 3 7 FB1_7 STD FAST 11 I/O O
q05<5> 3 7 FB1_11 STD FAST 10 GCK/I/O O
q05<6> 3 7 FB1_9 STD FAST 9 GCK/I/O O
q06<0> 3 7 FB1_18 STD FAST 24 I/O O
q06<1> 3 7 FB1_16 STD FAST 23 I/O O
q06<2> 3 7 FB3_8 STD FAST 21 I/O O
q06<3> 3 7 FB1_13 STD FAST 20 I/O O
q06<4> 3 7 FB3_5 STD FAST 19 I/O O
q06<5> 3 7 FB1_12 STD FAST 18 I/O O
q06<6> 3 7 FB3_2 STD FAST 17 I/O O
q07<0> 3 7 FB3_14 STD FAST 36 I/O O
q07<1> 3 7 FB3_11 STD FAST 33 I/O O
q07<2> 3 7 FB3_6 STD FAST 34 I/O O
q07<3> 3 7 FB3_4 STD FAST 32 I/O O
q07<4> 3 7 FB3_3 STD FAST 31 I/O O
q07<5> 3 7 FB3_9 STD FAST 26 I/O O
q07<6> 3 7 FB3_1 STD FAST 25 I/O O
** INPUTS **
Signal Loc Pin Pin Pin
Name # Type Use
clk FB2_10 75 I/O I
din<0> FB4_17 66 I/O I
din<1> FB4_16 62 I/O I
din<2> FB4_12 58 I/O I
din<3> FB4_14 56 I/O I
din<4> FB4_6 54 I/O I
din<5> FB4_11 53 I/O I
din<6> FB4_3 51 I/O I
s<0> FB2_9 74 GSR/I/O I
s<1> FB2_8 72 I/O I
s<2> FB2_5 70 I/O I
s<3> FB2_4 68 I/O I
End of Resources Used by Successfully Mapped Logic
*********************Function Block Resource Summary***********************
Function # of FB Inputs Signals Total O/IO IO
Block Macrocells Used Used Pt Used Req Avail
FB1 18 30 30 54 18/0 18
FB2 12 24 24 36 12/0 17
FB3 17 29 29 51 17/0 17
FB4 9 20 20 27 9/0 17
---- ----- ----- -----
56 168 56/0 69
*********************************** FB1 ***********************************
Number of function block inputs used/remaining: 30/6
Number of signals used by logic mapping into function block: 30
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
q04<3> 3 0 0 2 FB1_1 STD 4 I/O O
q04<6> 3 0 0 2 FB1_2 STD 1 I/O O
q04<1> 3 0 0 2 FB1_3 STD 6 I/O O
q04<0> 3 0 0 2 FB1_4 STD 7 I/O O
q04<5> 3 0 0 2 FB1_5 STD 2 I/O O
q04<4> 3 0 0 2 FB1_6 STD 3 I/O O
q05<4> 3 0 0 2 FB1_7 STD 11 I/O O
q04<2> 3 0 0 2 FB1_8 STD 5 I/O O
q05<6> 3 0 0 2 FB1_9 STD 9 GCK/I/O O
q05<3> 3 0 0 2 FB1_10 STD 13 I/O O
q05<5> 3 0 0 2 FB1_11 STD 10 GCK/I/O O
q06<5> 3 0 0 2 FB1_12 STD 18 I/O O
q06<3> 3 0 0 2 FB1_13 STD 20 I/O O
q05<2> 3 0 0 2 FB1_14 STD 12 GCK/I/O O
q05<1> 3 0 0 2 FB1_15 STD 14 I/O O
q06<1> 3 0 0 2 FB1_16 STD 23 I/O O
q05<0> 3 0 0 2 FB1_17 STD 15 I/O O
q06<0> 3 0 0 2 FB1_18 STD 24 I/O O
Signals Used by Logic in Function Block
1: clk 11: "q04<2>".LFBK 21: "q05<5>".LFBK
2: "din<0>" 12: "q04<3>".LFBK 22: "q05<6>".LFBK
3: "din<1>" 13: "q04<4>".LFBK 23: "q06<0>".LFBK
4: "din<2>" 14: "q04<5>".LFBK 24: "q06<1>".LFBK
5: "din<3>" 15: "q04<6>".LFBK 25: "q06<3>".LFBK
6: "din<4>" 16: "q05<0>".LFBK 26: "q06<5>".LFBK
7: "din<5>" 17: "q05<1>".LFBK 27: "s<0>"
8: "din<6>" 18: "q05<2>".LFBK 28: "s<1>"
9: "q04<0>" 19: "q05<3>".LFBK 29: "s<2>"
10: "q04<1>".LFBK 20: "q05<4>".LFBK 30: "s<3>"
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
q04<3> X...X......X..............XXXX.......... 7 7
q04<6> X......X......X...........XXXX.......... 7 7
q04<1> X.X......X................XXXX.......... 7 7
q04<0> XX......X.................XXXX.......... 7 7
q04<5> X.....X......X............XXXX.......... 7 7
q04<4> X....X......X.............XXXX.......... 7 7
q05<4> X....X.............X......XXXX.......... 7 7
q04<2> X..X......X...............XXXX.......... 7 7
q05<6> X......X.............X....XXXX.......... 7 7
q05<3> X...X.............X.......XXXX.......... 7 7
q05<5> X.....X.............X.....XXXX.......... 7 7
q06<5> X.....X..................XXXXX.......... 7 7
q06<3> X...X...................X.XXXX.......... 7 7
q05<2> X..X.............X........XXXX.......... 7 7
q05<1> X.X.............X.........XXXX.......... 7 7
q06<1> X.X....................X..XXXX.......... 7 7
q05<0> XX.............X..........XXXX.......... 7 7
q06<0> XX....................X...XXXX.......... 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK/FCLK - Global clock
O - Output GTS/FOE - Global 3state/output-enable
(b) - Buried macrocell
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB2 ***********************************
Number of function block inputs used/remaining: 24/12
Number of signals used by logic mapping into function block: 24
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
q02<1> 3 0 0 2 FB2_1 STD 63 I/O O
q02<4> 3 0 0 2 FB2_2 STD 69 I/O O
q02<3> 3 0 0 2 FB2_3 STD 67 I/O O
(unused) 0 0 0 5 FB2_4 68 I/O I
(unused) 0 0 0 5 FB2_5 70 I/O I
q02<5> 3 0 0 2 FB2_6 STD 71 I/O O
q02<6> 3 0 0 2 FB2_7 STD 76 GTS/I/O O
(unused) 0 0 0 5 FB2_8 72 I/O I
(unused) 0 0 0 5 FB2_9 74 GSR/I/O I
(unused) 0 0 0 5 FB2_10 75 I/O I
q03<6> 3 0 0 2 FB2_11 STD 77 GTS/I/O O
q03<5> 3 0 0 2 FB2_12 STD 79 I/O O
q03<4> 3 0 0 2 FB2_13 STD 80 I/O O
q03<3> 3 0 0 2 FB2_14 STD 81 I/O O
q03<1> 3 0 0 2 FB2_15 STD 83 I/O O
q03<2> 3 0 0 2 FB2_16 STD 82 I/O O
q03<0> 3 0 0 2 FB2_17 STD 84 I/O O
(unused) 0 0 0 5 FB2_18 (b)
Signals Used by Logic in Function Block
1: clk 9: "q02<1>".LFBK 17: "q03<3>".LFBK
2: "din<0>" 10: "q02<3>".LFBK 18: "q03<4>".LFBK
3: "din<1>" 11: "q02<4>".LFBK 19: "q03<5>".LFBK
4: "din<2>" 12: "q02<5>".LFBK 20: "q03<6>".LFBK
5: "din<3>" 13: "q02<6>".LFBK 21: "s<0>"
6: "din<4>" 14: "q03<0>".LFBK 22: "s<1>"
7: "din<5>" 15: "q03<1>".LFBK 23: "s<2>"
8: "din<6>" 16: "q03<2>".LFBK 24: "s<3>"
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
q02<1> X.X.....X...........XXXX................ 7 7
q02<4> X....X....X.........XXXX................ 7 7
q02<3> X...X....X..........XXXX................ 7 7
q02<5> X.....X....X........XXXX................ 7 7
q02<6> X......X....X.......XXXX................ 7 7
q03<6> X......X...........XXXXX................ 7 7
q03<5> X.....X...........X.XXXX................ 7 7
q03<4> X....X...........X..XXXX................ 7 7
q03<3> X...X...........X...XXXX................ 7 7
q03<1> X.X...........X.....XXXX................ 7 7
q03<2> X..X...........X....XXXX................ 7 7
q03<0> XX...........X......XXXX................ 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK/FCLK - Global clock
O - Output GTS/FOE - Global 3state/output-enable
(b) - Buried macrocell
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB3 ***********************************
Number of function block inputs used/remaining: 29/7
Number of signals used by logic mapping into function block: 29
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
q07<6> 3 0 0 2 FB3_1 STD 25 I/O O
q06<6> 3 0 0 2 FB3_2 STD 17 I/O O
q07<4> 3 0 0 2 FB3_3 STD 31 I/O O
q07<3> 3 0 0 2 FB3_4 STD 32 I/O O
q06<4> 3 0 0 2 FB3_5 STD 19 I/O O
q07<2> 3 0 0 2 FB3_6 STD 34 I/O O
q00<0> 3 0 0 2 FB3_7 STD 35 I/O O
q06<2> 3 0 0 2 FB3_8 STD 21 I/O O
q07<5> 3 0 0 2 FB3_9 STD 26 I/O O
q00<2> 3 0 0 2 FB3_10 STD 40 I/O O
q07<1> 3 0 0 2 FB3_11 STD 33 I/O O
q00<4> 3 0 0 2 FB3_12 STD 41 I/O O
q00<6> 3 0 0 2 FB3_13 STD 43 I/O O
q07<0> 3 0 0 2 FB3_14 STD 36 I/O O
q00<1> 3 0 0 2 FB3_15 STD 37 I/O O
q01<1> 3 0 0 2 FB3_16 STD 45 I/O O
q00<3> 3 0 0 2 FB3_17 STD 39 I/O O
(unused) 0 0 0 5 FB3_18 (b)
Signals Used by Logic in Function Block
1: clk 11: "q00<2>".LFBK 21: "q07<2>".LFBK
2: "din<0>" 12: "q00<3>".LFBK 22: "q07<3>".LFBK
3: "din<1>" 13: "q00<4>".LFBK 23: "q07<4>".LFBK
4: "din<2>" 14: "q00<6>".LFBK 24: "q07<5>".LFBK
5: "din<3>" 15: "q01<1>".LFBK 25: "q07<6>".LFBK
6: "din<4>" 16: "q06<2>".LFBK 26: "s<0>"
7: "din<5>" 17: "q06<4>".LFBK 27: "s<1>"
8: "din<6>" 18: "q06<6>".LFBK 28: "s<2>"
9: "q00<0>" 19: "q07<0>".LFBK 29: "s<3>"
10: "q00<1>".LFBK 20: "q07<1>".LFBK
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
q07<6> X......X................XXXXX........... 7 7
q06<6> X......X.........X.......XXXX........... 7 7
q07<4> X....X................X..XXXX........... 7 7
q07<3> X...X................X...XXXX........... 7 7
q06<4> X....X..........X........XXXX........... 7 7
q07<2> X..X................X....XXXX........... 7 7
q00<0> XX......X................XXXX........... 7 7
q06<2> X..X...........X.........XXXX........... 7 7
q07<5> X.....X................X.XXXX........... 7 7
q00<2> X..X......X..............XXXX........... 7 7
q07<1> X.X................X.....XXXX........... 7 7
q00<4> X....X......X............XXXX........... 7 7
q00<6> X......X.....X...........XXXX........... 7 7
q07<0> XX................X......XXXX........... 7 7
q00<1> X.X......X...............XXXX........... 7 7
q01<1> X.X...........X..........XXXX........... 7 7
q00<3> X...X......X.............XXXX........... 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK/FCLK - Global clock
O - Output GTS/FOE - Global 3state/output-enable
(b) - Buried macrocell
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB4 ***********************************
Number of function block inputs used/remaining: 20/16
Number of signals used by logic mapping into function block: 20
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
q01<0> 3 0 0 2 FB4_1 STD 46 I/O O
q00<5> 3 0 0 2 FB4_2 STD 44 I/O O
(unused) 0 0 0 5 FB4_3 51 I/O I
q01<5> 3 0 0 2 FB4_4 STD 52 I/O O
q01<3> 3 0 0 2 FB4_5 STD 47 I/O O
(unused) 0 0 0 5 FB4_6 54 I/O I
q01<6> 3 0 0 2 FB4_7 STD 55 I/O O
q01<2> 3 0 0 2 FB4_8 STD 48 I/O O
q01<4> 3 0 0 2 FB4_9 STD 50 I/O O
(unused) 0 0 0 5 FB4_10 57 I/O
(unused) 0 0 0 5 FB4_11 53 I/O I
(unused) 0 0 0 5 FB4_12 58 I/O I
q02<0> 3 0 0 2 FB4_13 STD 61 I/O O
(unused) 0 0 0 5 FB4_14 56 I/O I
q02<2> 3 0 0 2 FB4_15 STD 65 I/O O
(unused) 0 0 0 5 FB4_16 62 I/O I
(unused) 0 0 0 5 FB4_17 66 I/O I
(unused) 0 0 0 5 FB4_18 (b)
Signals Used by Logic in Function Block
1: clk 8: "q00<5>".LFBK 15: "q02<0>".LFBK
2: "din<0>" 9: "q01<0>".LFBK 16: "q02<2>".LFBK
3: "din<2>" 10: "q01<2>".LFBK 17: "s<0>"
4: "din<3>" 11: "q01<3>".LFBK 18: "s<1>"
5: "din<4>" 12: "q01<4>".LFBK 19: "s<2>"
6: "din<5>" 13: "q01<5>".LFBK 20: "s<3>"
7: "din<6>" 14: "q01<6>".LFBK
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
q01<0> XX......X.......XXXX.................... 7 7
q00<5> X....X.X........XXXX.................... 7 7
q01<5> X....X......X...XXXX.................... 7 7
q01<3> X..X......X.....XXXX.................... 7 7
q01<6> X.....X......X..XXXX.................... 7 7
q01<2> X.X......X......XXXX.................... 7 7
q01<4> X...X......X....XXXX.................... 7 7
q02<0> XX............X.XXXX.................... 7 7
q02<2> X.X............XXXXX.................... 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK/FCLK - Global clock
O - Output GTS/FOE - Global 3state/output-enable
(b) - Buried macrocell
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
;;-----------------------------------------------------------------;;
; Implemented Equations.
Omitting
**************************** Device Pin Out ****************************
Device : XC9572-15-PC84
q q q q q q q q q q q q q q q q q q
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 4 4 4 4 4 4 4 3 3 3 3 3 3 3 2
< < < G < < < < < < < < < < < < < V < < c
4 5 6 N 0 1 2 3 4 5 6 0 1 2 3 4 5 C 6 6 l
> > > D > > > > > > > > > > > > > C > > k
--------------------------------------------------------------
/11 10 9 8 7 6 5 4 3 2 1 84 83 82 81 80 79 78 77 76 75 \
q05<2> | 12 74 | s<0>
q05<3> | 13 73 | VCC
q05<1> | 14 72 | s<1>
q05<0> | 15 71 | q02<5>
GND | 16 70 | s<2>
q06<6> | 17 69 | q02<4>
q06<5> | 18 68 | s<3>
q06<4> | 19 67 | q02<3>
q06<3> | 20 66 | din<0>
q06<2> | 21 XC9572-15-PC84 65 | q02<2>
VCC | 22 64 | VCC
q06<1> | 23 63 | q02<1>
q06<0> | 24 62 | din<1>
q07<6> | 25 61 | q02<0>
q07<5> | 26 60 | GND
GND | 27 59 | TDO
TDI | 28 58 | din<2>
TMS | 29 57 | TIE
TCK | 30 56 | din<3>
q07<4> | 31 55 | q01<6>
q07<3> | 32 54 | din<4>
\ 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 /
--------------------------------------------------------------
q q q q q V q q q G q q q q q q G q d q d
0 0 0 0 0 C 0 0 0 N 0 0 0 0 0 0 N 0 i 0 i
7 7 0 7 0 C 0 0 0 D 0 0 1 1 1 1 D 1 n 1 n
< < < < < < < < < < < < < < < < < <
1 2 0 0 1 3 2 4 6 5 1 0 3 2 4 6 5 5
> > > > > > > > > > > > > > > > > >
Legend : NC = Not Connected, unbonded pin
TIE = Tie pin to GND or board trace driven to valid logic level
VCC = Dedicated Power Pin
GND = Dedicated Ground Pin
TDI = Test Data In, JTAG pin
TDO = Test Data Out, JTAG pin
TCK = Test Clock, JTAG pin
TMS = Test Mode Select, JTAG pin
PROHIBITED = User reserved pin
**************************** Compiler Options ****************************
Following is a list of all global compiler options used by the fitter run.
Device(s) Specified : XC9572-15-PC84
Use Timing Constraints : ON
Ignore Assignments In Design File : OFF
Create Programmable Ground Pins : OFF
Use Advanced Fitting : ON
Use Local Feedback : ON
Use Pin Feedback : ON
Default Power Setting : STD
Default Output Slew Rate : FAST
Guide File Used : NONE
Multi Level Logic Optimization : ON
Timing Optimization : ON
Power/Slew Optimization : OFF
High Fitting Effort : ON
Automatic Wire-ANDing : ON
Xor Synthesis : ON
D/T Synthesis : ON
Use Boolean Minimization : ON
Global Clock(GCK) Optimization : OFF
Global Set/Reset(GSR) Optimization : OFF
Global Output Enable(GTS) Optimization : OFF
Collapsing pterm limit : 25
Collapsing input limit : 36 |
