| Implement to take the 3D photograph |
 The photographs for the right eye and for the left eye are taken in the 70-mm interval. The camera which the photograph takes both photographs at the same time is marketed. However, at the camera which I used, the approaching photography was difficult. This time, I was made to be able to take the photographs which were 70 mm separated by devising the part which fixes the camera. Because the photographs can not be taken at the same time, the moving one can not be taken.
  Pedestal I used the channel(  form) which is made of the aluminum with the 1-mm thickness as the pedestal.I used the one with the 30-mm width, the 15-mm height. The length is adjusted to the size of the camera. I stick the cloth of the felt on the surface which installs the camera and the camera doesn't hurt. Way of photography You take the photograph for the right eye first, and turn the pedestal by the 180 degrees and take the photograph for the left eye. You synthesize the photographs to have taken to one sheet using the software for the picture. The attention point in this case is the distance of both photographs. You confirm the made photomontage by the viewer and do the optimal synthesis. (It is troublesome a little) It makes the equipment to take the photograph the center of the finder of the camera. Because I began the photography of the 3D photograph just now in this way, I don't find the point well. Stereo camera of marketing When you use the stereo camera of the marketing, you can take the photograph of the moving one. But, the focus and the exposure of my camera are the fixation. It is possible to use for usual snapshot photography sufficiently. The following is linked to the 3D photograph of the penguin which swims in the water to have taken at the aquarium. You can see the penguin which swims in the water realistically. |
