[Menu]>[3D photograph]

Print of the 3D photograph

The size of the 3D photograph must be the size which is the same as the one which I made. The interval of the two photographs for the right eye and the left eye is important. As for the photograph which I took, the one after the size adjustment is stuck in the page as the JPG file. The following two are thought of as the way of making the photograph to see with the viewer. The way of printing with the print menu of your browser, and cutting off and using The way of printing the JPG file using the picture software by taking in it with the right click menu of your browser Depending on some picture software, the size of the picture changes. So, the attention is necessary. Print the picture in the high quality as possible as you can. The pictures which I am introducing are the pictures to have taken the photograph with the film-type camera. The picture is taken in to the PC with the scanner and is changed into the JPG file. It is better that you don't expect the high quality picture to do much. The quality of the picture depends on the printer which you use, too.