[Menu]>[Circuits Gallery]>[Room temperature controller]

Program list of temperature controller

Temperature controller program Source program : tempcont_source.zip HEX file : tempcont_hex.zip Display test program Source program : temptst1_source.zip HEX file : temptst1_hex.zip This display test program is for checking normal operation of the display control circuit of LED, and the circuit of switches. The contents of display are shown below. 10th of Outside : "8" is always displayed. 1st of Outside : The setting of interval BCD switch is displayed. 10th of Inside : The state of UP/DOWN mode switch is displayed. ( UP : 1 / DOWN : 0 ) 1st of Inside : The state of TEST mode is displayed. ( TEST OFF : 2 / IN TEST : 1 / OUT TEST : 0 ) 10th of preset : The setting of 10th of preset BCD switch is displayed. 1st of preset : The setting of 1st of preset BCD switch is displayed.