On this page, I will introduce the printed board pattern for the PIC LED flasher with EAGLE.
The software of PIC was changed. A display pattern will be held once a switch is pushed.

SW1:	To the left from the right.		SW4:	In the center from right and left.
SW2:	To right and left from a center.		SW5:	To the right from the left.
SW3:	Round-trip			An initial value is SW3.

Circuit drawing	Pattern drawing The size of this printed board is 2.76 x 1.97 inch.
You can browse bigger size drawing by clicking each drawing.

PCB Gerber file	eagle_flasher.zip
PIC Source program	led_flash_source.zip
PIC HEX file	led_flash_hex.zip